Geophysics - Surface Imaging

Full-Waveform Inversion: Where are the Anisotropic Parameters Hiding?

 

Instructor

  Prof. Tariq Alkhalifah (KAUST, Riyadh, Saudi Arabia)

Duration

  1 day

Disciplines

  Geophysics – Surface Imaging

Level

  Foundation

Language

  English

Course book

   The EET 10 book is available in the EAGE Bookshop

EurGeol

  5 CPD points

Keywords

 
 ANISOTROPY   IMAGING   ISOTROPY   MIGRATION   MINERALS   OIL AND GAS   VELOCITIES   WAVE EQUATION   WAVE PROPAGATION 

 

This course is also offered as EET 10

 

Course description

The EET 10 book by Prof. Tariq Alkhalifah

The course starts by introducing the fundamentals of full-waveform inversion (FWI) starting from its basic definition. It focuses on the model update issues and provides analysis of its probable success in converging to a plausible model. In the course we will discuss the many challenges we face in applying FWI on seismic data and introduce modern day proposed solutions to these challenges. The focus of the course will be on FWI applied to anisotropic media. As a result, the course will also introduce anisotropy, its optimal parametrization and wavefield simulation in such media. Practical multi-parameter inversion for anisotropic parameters requires an optimal FWI setup. We will discuss such a setup, which includes the proper parametrization of the medium and data access scheme necessary for a potential convergence to a plausible anisotropic model.

 

Course objectives

Upon completion of the course, participants will be able to understand:

  • The scientific foundation behind full-waveform inversion;
  • FWI challenges;
  • Wave propagation in anisotropic media;
  • Anisotropy + migration velocity analysis;
  • Anisotropy + FWI.

 

Course outline

I - Introduction to seismic inversion:

  1. What is inversion?
  2. What do we mean by full waveform inversion?
  3. The Algorithm.

II - The elements of seismic waveform inversion:

  1. Model and data.
  2. The objective function.
  3. The update.
  4. The sensitivity kernel.
  5. The non-linear issue.
  6. Examples.

III - Seismic anisotropy:

  1. Definition and parameters.
  2. The acoustic anisotropic wave equation.
  3. Fundamental issues.

IV - FWI and anisotropy:

  1. Multi-parameter inversion.
  2. The right set of parameters.
  3. The anisotropic sensitivity kernels.
  4. Getting an initial model.
  5. Anisotropy and MVA.

 

Participants' profile

The course is designed for geophysics, mathematicians and physicists working on problems related to seismic imaging of the Earth and building the necessary velocity models to do so.

 

Prerequisites

Participants should have some knowledge on the physics of seismic wave propagation.

 

About the instructor

Prof. Tariq Alkhalifah

Tariq A. Alkhalifah is a professor of geophysics in the division of Physical Sciences and Engineering at King Abdullah University for Science and Technology (KAUST). He assumed his duties there in June 2009. Prior to joining KAUST, Tariq was a research professor and director of the Oil and Gas Research Institute at King Abdulaziz City for Science & Technology (KACST). He has also been associate research professor, assistant research professor and research assistant at KACST. From 1996 to 1998, Tariq served as a postdoctoral researcher for the Stanford Exploration Project at Stanford University, USA. He received the J. Clarence Karcher Award from the Society of Exploration Geophysicists (SEG) in 1998 and the Conrad Schlumberger Award from the European Association for Geoscientists and Engineers (EAGE) in 2003. He is a member of SEG and EAGE. Tariq received his doctoral degree in geophysics (1997) and master's degree (1993) in geophysical engineering from the Colorado School of Mines, USA. He holds a bachelor's degree (1988) in geophysics from King Fahd University of Petroleum and Minerals, Saudi Arabia.

 

                    Learning Geoscience Logo

 

Explore other courses under this discipline:

 

Full Waveform Inversion in an Anisotropic World. Where Are the Parameters Hiding?

Instructor: Prof. Tariq Alkhalifah (KAUST)

The course starts by introducing the fundamentals of full-waveform inversion (FWI) starting from its basic definition. It focuses on the model update issues and provides analysis of its probable success in converging to a plausible model. In the course we will discuss the many challenges we face in applying FWI on seismic data and introduce modern day proposed solutions to these challenges. The focus of the course will be on FWI applied to anisotropic media. As a result, the course will also introduce anisotropy, its optimal parametrization and wavefield simulation in such media. Practical multi-parameter inversion for anisotropic parameters requires an optimal FWI setup. We will discuss such a setup, which includes the proper parametrization of the medium and data access scheme necessary for a potential convergence to a plausible anisotropic model.

More information

Principles and Applications of Seismic Interferometry and Ambient Noise Seismology in Hydrocarbon Exploration

Instructor: Dr Gerard Schuster (KAUST)

This one-day course is designed for a broad range of seismic researchers, data processors, and interpreters working in the petroleum industry. The course teaches the principles of seismic interferometry, ambient noise seismology and their applications to surface seismic, VSP, and OBS data. The ultimate objectives are to enable geophysicists to evaluate the potential of seismic interferometry in uniquely solving their problems.

More information

Seismic Diffraction – Modelling, Imaging and Applications

Instructors: Prof. Evgeny Landa (Tel Aviv University) and Dr Tijmen Jan Moser (Moser Geophysical Services)

Diffractions have been identified as the key seismic manifestation of fractures and other small-scale reservoir heterogeneities. This two-day course will present the current state-of-the-art of diffraction technology and put this in context by a review of its past developments. The course will cover both forward diffraction modeling and diffraction imaging. Case studies of diffraction imaging will be presented covering applications in seismic exploration and other areas of geoscientific interest.

More information

3D Tomography by Active and Passive Seismic Data

Instructor: Prof. Dr Aldo Vesnaver (The Petroleum Institute)

Building a 3D Earth model in depth is needed not only for accurate seismic imaging, but also for linking well data (as logs and cores) and reservoir simulations. Tomography can build a 3D macro-model for P and S velocities that integrates surface and well data, as well as active and passive seismic. This short course will introduce the basic concepts of traveltime inversion keeping all the math at a very basic level.

More information

Applied Depth Imaging

Instructor: Dr Ruben Martinez (Reservoir Geoscience)

This course has two main segments. In the first segment, the participant will understand the basic concepts behind the tools commonly employed in velocity model building and depth migration.
In the second segment, the participant will learn how to use these tools for building velocity models and generate seismic images in depth using practical work flows for a variety of complex geologic scenarios. At the end of the course, an overview of the emerging depth imaging technologies is presented.

More information

Beyond Conventional Seismic Imaging

Instructor: Prof. Evgeny Landa (Tel Aviv University)

While depth imaging play an increasing role in seismic exploration, data analysis and imaging in time domain play an important role. Moreover, for complex models that request the use of prestack depth migration, time imaging usually constitutes a key first step. The proposed course discusses: a) data analysis and imaging based on new procedures such as Multifocusing and Common Reflection Surface; b) diffraction Imaging based on diffracted energy targeting to image small scale subsurface objects; c) imaging without precise knowledge of the subsurface velocity model (path summation); d) pitfalls and challenges of seismic inversion.

More information

Seismic Depth Imaging and Anisotropic Velocity Model Building

Instructor: Mr Etienne Robein (ERT)

The course will present in simple terms (cartoons rather than equations!) the principle of different techniques in each class of methods (Kirchhoff, Beam Migrations, WEM, RTM), while pointing out their respective merits and limitations. Similarities and differences between Time- and Depth-Imaging will be briefly reminded. In parallel, special emphasis is put on methods used to build the necessary anisotropic velocity models. Both Ray-based techniques (linear and non-linear tomography) and wavefield extrapolation-based ones, including Full Waveform Inversion, are addressed.

More information

Full-Waveform Inversion for High-Resolution Reservoir Characterization

Instructor: Prof. Dr Dries Gisolf (Delft Inversion)

This two-day course will start with an introduction and a short recap on complex integral transforms (Fourier, Laplace, F/K and linear Radon). Followed by topics on: - The acoustic wave equation in inhomogenous media - Integral representations of the acoustic wave equation; Kirchhoff-Rayleigh and the Scattering Integral (Lippmann-Schwinger) - The AVO data model; Zoeppritz reflection coefficients - Linear inversion of AVO data including regularisation; synthetic and real data examples - The non-linear data model for inversion; data equation and object equation; iterative, multiplicatively regularised inversion - Applications based on an elastic full-wavefield non-linear data model; realistic synthetic reservoir study, real data case studies including low-frequency model extraction and seismic-to-well matching. Synthetic time-lapse example.

More information

Migration and Velocity Model Building

Instructor: Mr Piet Gerritsma (Gerritsma Geophysical Training and Consultancy)

The process of migration, whereby a proper image in time or depth of the subsurface is obtained, is directly related with the velocity model that both serves as input for the migration process as well as is the result of such a migration. Therefore migration and velocity model building are intimately related processes and often applied in an iterative mode. This course gives an overwiew with theory and implementation of the representative migration algorithms as well as of the multitude of ways to build and update subsurface velocity models.

More information

The Principles of Quantitative Acoustical Imaging

Instructor: Prof. Dr Dries Gisolf (Delft Inversion)

This course presents a systematic approach to imaging of acoustic reflection data and the extraction of media property information from the image amplitudes, based on wave theory. Although the approach is valid for a wide range of acoustical frequencies and applications, there is a bias towards seismic imaging.

More information

--